Caution:
If you must use pliers to loosen the ring, be careful not to crush the
tip. Never use pliers or other tools to retighten the ring on the cigarette lighter
plug.
2.
Pull the ring straight out, then remove the metal tip, spring and old fuse.
3.
Check the fuse to see if it has blown. If it has, replace it.
4.
Replace the metal tip and spring inside the ring, then place the fuse inside
the cigarette lighter plug and screw the ring back onto the plug. Make sure the
metal tip is visible when you reassemble the cigarette lighter plug.
Direct connecting/hard wiring your S2 neo
You can power your Snooper S2 by wiring it directly to your vehicles 12v
electrical system using the ’Hard Wire’ cable supplied as standard with your
unit. Firstly connect the positive side of the cable (Red) to a 12v switched live.
This is a live that is On when the ignition is On and Off when the ignition is
Off. The negative side of the lead should be connected to a negative ground,
so can be attached to any metal portion of the vehicles frame. Next plug the
small adaptor on the other end of the lead into the DC 12V input socket on the
back of the unit.
Important:
If you are unfamiliar with this procedure, please consult a
professional auto electrician
INST
ALL
ATION
INST
ALL
ATION
12
Return to Contents Page
