manualshive.com logo in svg

Snom M9, Руководство администратора

Поделиться
Скачать
Snom M9 Скачать руководство пользователя страница 83

 

Customizing the Handset

75

2.  Select a setting.  The three options are described below:

    

•

Activate:  The display goes to power-saving mode after 10 seconds, and the keypad LED is 

switched off to save power. 

    

•

Deactivate:  The display turns off completely after 10 seconds, and the keypad LED lights up inter-

mittently.

    

•

Always:  The display stays on permanently (high battery consumption mode), and the keypad LED 

stays lit.

3.  Press OK to save the setting.

Changing Ring Tones

You can set the volume and ring tones for external calls and internal calls.

 

•

Volume:  You can choose between six volumes (1–6, from low to high).  You can also turn the ringer 
off (0).

 

•

Ring tones:  Ten different ring tones are available, including traditional, jazz, rambler music, space 
music, and classical dance.

In idle status:

1.  Press the center navigation button, followed  by  

 

g

 

Audio Settings

 

g

 

Ringer Settings

.

2.  Select a setting, e.g., 

External Calls

.

3.  Set the volume (1–6), then scroll to the next line and select a melody.
4.  Press OK to save the settings.

Changing the Volume in Speaker Mode

The Ear Protection setting activates lower speaker volumes on connected snom m9 handsets.  By default this 
setting is turned on. To re-enable the normal speaker levels on the connected handsets:

1.  Log in to the m9 web interface.
2.  Click the identity that belongs to the handset.
3.  Click 

Behavior

, then set Ear Protection to off.

www.InternetVoipPhone.co.uk | [email protected] | 0800 088 48 46

Содержание M9





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды