7
Register the C52-SP
You can register the C52-SP DECT Expansion Speakerphone to a C520 SIP Conference
phone or a C620 SIP Wireless Conference Phone�
Register the C52-SP to a C620
For auto registration of the C52-SP, no action is required�
If the administrator of the C52-SP unit decides to perform manual registration instead
of auto registration to a C620 system:
1�
Press and hold the
MUTE ALL
button on the C52-SP unit for five seconds�
2� Press and hold the REGISTRATION button on the bottom of the C52-SP unit for
five seconds�
When you release the button, the C52-SP LEDs will flash red and green
alternatingly� This indicates the C52-SP is ready for registration�
3� Press and hold the LINK key on the C620 base unit for four seconds�
Registration shall begin�
Register the C52-SP to a C520
1�
Place the C52-SP near the C520 SIP Conference phone�
2� Press and hold the REGISTRATION button on the bottom of the C52-SP unit for
five seconds�
When you release the button, the C52-SP LEDs will flash red and green
alternatingly� This indicates the C52-SP is ready for registration�
3� On the C520, press
�
4� On the Main Menu, press
q
to select
3. User Settings
, and then press
�
5� On the User Settings menu, press
q
to select
6. Wireless speaker
, and then
press
�
6� On the Wireless Speaker menu, with
1. Register
selected, press
The screen displays “Registering���”
•
If registration is successful, the screen displays “Registration succeeded�”
The base unit plays a confirmation tone� The registered speakerphone LEDs
stop flashing red and green� The LEDs turn green briefly, and then turn off�
•
If registration fails, the screen displays “Registration failed�”
7� Repeat steps 1 to 6 to register any additional wireless speakerphones�
You can register up to three C52-SP units to a C520�
To cancel registration, press
�
For complete operating instructions, see the C52-SP User Manual�