6
Status Indicators – LED color and behavior
RED and GREEN
(alternating)
Flashing
Ready for registration
GREEN
On for 5 seconds
Sucessfully registered
Steady
Call Active, speaker on
Flashing
Incoming call
Slow Flash
Paged by base
RED
On for 5 seconds
Registration failed
Steady
Microphone muted
Slow Flash
Out of range, deregistered
ORANGE
Steady
Reset mode
On for 5 seconds
Power on
Install the battery
•
Risk of explosion! Batteries should not be exposed to excessive
heat such as bright sunlight or fire�
•
Use only the supplied battery�
1�
After removing the battery door, plug the battery connector securely into the
socket inside the battery compartment�
2� Place the battery into the battery compartment�
3� Attach the battery door until it clicks into place�
Connecting power to the C52-SP
1�
Plug one end of the AC adapter into the power jack on the bottom of the unit�
2� Route the cord through the slots�
3� Plug the large end of the AC adapter into a wall outlet not controlled by a switch�
•
The supplied power adapter is designed for use with only the C52-
SP� It is not designed to power other devices� Do not connect the
supplied power adapter to any other devices�
•
The AC power cord is intended for a vertical or floor mount
position� The prongs are not designed to hold the plug in place if it
is plugged into a ceiling or cabinet outlet�