Snom C52-SP Скачать руководство пользователя страница 10

10

 

Important safety instructions

When using your C52-SP DECT Expansion Speakerphone, basic safety precautions 
should always be followed to reduce the risk of fire, electric shock and injury to 
persons, including the following:

1� 

Read and understand all instructions�

2�  Follow all warnings and instructions marked on the product�

3�  Unplug this product from the wall outlet before cleaning� Do not use liquid or 

aerosol cleaners� Use a damp cloth for cleaning�

4�  Do not use this product near water such as near a bathtub, wash bowl, kitchen 

sink, laundry tub or swimming pool, or in a wet basement or shower�

5�  Do not place this product on an unstable table, shelf, stand or other unstable 

surfaces�

6�  Slots and openings in the back or bottom of the base unit and wireless mic are 

provided for ventilation� To protect them from overheating, these openings must 
not be blocked by placing the product on a soft surface such as a bed, sofa or rug� 
This product should never be placed near or over a radiator or heat register� This 
product should not be placed in any area where proper ventilation is not provided�

7�  This product should be operated only from the type of power source indicated on 

the marking label� If you are not sure of the type of power supply in your office, 
consult your dealer or local power company�

8�  Do not allow anything to rest on the power cord� Do not install this product where 

the cord may be walked on�

9�  Never push objects of any kind into this product through the slots in the base unit 

or wireless mic because they may touch dangerous voltage points or create a 
short circuit� Never spill liquid of any kind on the product�

10�  To reduce the risk of electric shock, do not disassemble this product, but take it 

to an authorized service facility� Opening or removing parts of the base unit or 
wireless mic other than specified access doors may expose you to dangerous 
voltages or other risks� Incorrect reassembling can cause electric shock when the 
product is subsequently used� 

11�  Do not overload wall outlets and extension cords�

12�  Unplug this product from the wall outlet and refer servicing to an authorized 

service facility under the following conditions: 
A�  

 

When the power supply cord or plug is damaged or frayed�

B�  

 

If liquid has been spilled onto the product�

C�  

 

If the product has been exposed to rain or water�

D�  

 

If the product does not operate normally by following the operating 
instructions� Adjust only those controls that are covered by the operation 
instructions� Improper adjustment of other controls may result in damage 
and often requires extensive work by an authorized technician to restore the 
product to normal operation�

Содержание C52-SP

















Отзывы: