manualshive.com logo in svg

Snom 00004390, Руководство пользователя


Поделиться
Скачать
background image

125

If requested by you, the complete corresponding source code of the 
Software can be sent by Snom Technology GmbH on a standard data 
storage medium against the reimbursement of the manufacturing 
costs of EUR 10.- per unit. 

The complete corresponding source code of the Software can also be 

downloaded from our web site http://www.snom.com/gpl_.html?&L=0. 

V..
 

Weitere Informationen finden Sie auch unter           

 

 http://www.snom.com. 

For further information see http://www.snom.com.

NO WARRANTY

11.  BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE 
IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY 
APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE 
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM 
„AS IS"WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR 
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  
THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE 
PROGRAM IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, 
YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR 
CORRECTION.

12.  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO 
IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO 
MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED 
ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, 
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF 
THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT 
LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR 
LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE 
PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH 
HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF 
SUCH DAMAGES.

END OF TERMS AND CONDITIONS

How to Apply These Terms 

to Your New Programs

I

f you develop a new program, and you want it to be of the greatest 

possible use to the public, the best way to achieve this is to make 
it free software which everyone can redistribute and change under 
these terms.

To do so, attach the following notices to the program.  It is safest to 

attach them to the start of each source file to most effectively convey 
the exclusion of warranty; and each file should have at least the 

"copyright" line and a pointer to where the full notice is found.

<one line to give the program‘s name and a brief idea of what it 
does>Copyright (C) <year>  <name of author>

This program is free software; you can redistribute it and/or modify 
it under the terms of the GNU General Public License as published by 
the Free Software Foundation; either version 2 of the License, or (at 
your option) any later version.

This program is distributed in the hope that it will be useful, but 
WITHOUT ANY WARRANTY; without even the implied warranty of 
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 
GNU General Public License for more details.

You should have received a copy of the GNU General Public License 
along with this program; if not, write to the Free Software Foundation, 
Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA

IV. 

Den vollständigen korrespondierenden Sourcecode der Software 
schickt Ihnen die Snom Technology GmbH auf Nachfrage gerne auf 
einem üblichen Datenträger gegen Erstattung der Herstellungskosten 
in Höhe von EUR 10,- zu. 

Der vollständige korrespondierende Sourcecode kann auch über 

unsere Website unter http://www.snom.com/gpl_.html?&L=0 

herunter geladen werden.  

Appendix 5

Содержание 00004390































































































































Отзывы:

Нет отзывов

Похожие инструкции для 00004390

NEFFOS C7 Quick Start Manual preview
C7
Бренд: NEFFOS Страницы: 32
Pantech C3 Quick Start Manual preview
C3
Бренд: Pantech Страницы: 2
N-Com B901 User Instructions preview
B901
Бренд: N-Com Страницы: 32
Haier M180 Guía Del Usuario preview
M180
Бренд: Haier Страницы: 24
GAI-Tronics 1114 Installation And User Manual preview
1114
Бренд: GAI-Tronics Страницы: 32
Janam XT3 Series User Manual preview
XT3 Series
Бренд: Janam Страницы: 70
Yealink T48G Manual preview
T48G
Бренд: Yealink Страницы: 38
Ole MP309 User Manual preview
MP309
Бренд: Ole Страницы: 34
DMP Electronics 265LTE-V Installation Manual preview
265LTE-V
Бренд: DMP Electronics Страницы: 4
Dotel DOT300 User Manual preview
DOT300
Бренд: Dotel Страницы: 37
jablotron JA-62GSM Installation Manual preview
JA-62GSM
Бренд: jablotron Страницы: 11
HTC TyTN User Manual preview
TyTN
Бренд: HTC Страницы: 204
Evolveo EasyPhone FD Manual preview
EasyPhone FD
Бренд: Evolveo Страницы: 23
AU Infobar C01 Basic Manual preview
Infobar C01
Бренд: AU Страницы: 96
Samsung SCH-R455C Manual Del Usuario preview
SCH-R455C
Бренд: Samsung Страницы: 113
Samsung SCH-R250 Manual Del Usuario preview
SCH-R250
Бренд: Samsung Страницы: 201
Samsung SCH-R570 Manual Del Usuario preview
SCH-R570
Бренд: Samsung Страницы: 104
Samsung SM-S921B User Manual preview
SM-S921B
Бренд: Samsung Страницы: 206

Бренды по названию

Популярные бренды

Загрузить еще бренды