-
15. Disarm with Boot Release (default=disable)
When set as Disable:
When operating the remote boot release the system will remain armed but the shock sensor will be bypassed. The boot will be
protected and shock sensor reactivated 3 sec. after closing the boot.
When set as Enable:
The system will be disarmed when operating the boot release, the siren will chirp twice and hazard lights flash twice to confirm.
*
The countdown of Auto. Rearming or Passive Arming will be interrupted when operating the boot release.
*
The remote boot release will still work with the ignition on.
16. Anti-hijacking Countdown (default=30sec.)
When set as 30 or 60 sec.:
The system will enter the Anti-hijacking mode after 30 or 60 sec. depending on the selection. The siren will chirp 10 times before
entering into the anti-hijacking mode as a last warning.
17. Activate Anti-hijacking Countdown (default=normal)
When set as Normal:
The countdown will start immediately when activating the anti-hijacking feature.
When set as Brake:
The system will enter the Anti-hijacking mode after the footbrake is tapped.
* After the system starts the countdown, press the valet switch before the last 10 chirps warning to stop the countdown and
deactivate the anti-hijacking.
18. Anti-hijacking by Remotes (default=disable)
When set as Enable:
The Anti-hijacking will be activated as follows:
-
With the system disarmed and the ignition on.
-
Press button #1 for 2 sec. to activate the anti-hijacking and the hazard lights flash once to confirm.
-
The anti-hijacking countdown will start depending on the selection of feature #17. The LED will flash every 2 secs. once the
countdown starts.
-
After 30 or 60 sec. depending on the selection of feature #16, the system enters the Anti-hijacking mode. 10 sec. before the
countdown ends, the siren and hazard lights will activate as a warning.
-
When the system is in anti-hijacking mode, the siren will sound and hazard lights flash until the system is overridden using the
emergency override procedure.
19. Anti-hijacking by IDoor (default=disable)
When set as Enable:
The Anti-hijacking will be activated as follows:
-
With the system disarmed and the ignition on.
-
Opening and closing a door will activate the anti-hijacking and the hazard lights will flash once to confirm.
-
The anti-hijacking countdown will start depending on the selection of feature #17. The LED will flash every 2 secs. once the
countdown starts.
-
After 30 or 60 sec. depending on the selection of feature #16, the system enters the Anti-hijacking mode. 10 sec. before the
countdown ends, the siren and hazard lights will activate as a warning.
-
When the system is in anti-hijacking mode, the siren will sound and hazard lights flash until the system is overridden using the
emergency override procedure.
20. Override Code (default= flash 1)
- Follow
Section
1.9 to change the Override Code.
- Follow
Section
2.6b of the user manual to operate the Override.
