IQSDA34
www.snellgroup.com
Controlling the IQSDA34 from the RollCall Control Panel
Issue 2 Rev 3
Page 22
©
2015 Snell Limited
5.6 Setup
The Setup screen displays basic information about the unit. Use the functions on the screen
to restart the unit, return all settings to their factory defaults, and to change the names of the
inputs.
.
5.6.1 Product Information
On the Setup screen, the following information is displayed:
•
Product:
The name of the module.
•
Software Version:
The currently installed software version number.
•
Serial No:
The module serial number.
•
Build:
The factory build number. This number identifies all parameters of the module.
•
KOS:
The operating system version number.
•
PCB:
The Printed Circuit Board revision number.
•
Licensed Options:
The installed licensed options.
5.6.2 Default Settings
The
Default Settings
button enables module settings to be reset to their factory defaults,
leaving user memories intact.
5.6.3 Factory Defaults
The
Factory Defaults
button enables the module settings to be reset to their factory defaults.
5.6.4 Restart
The
Restart
button enables the module to be rebooted, simulating a power-up/power-down
cycle.
Note:
Resetting the module to its factory defaults also clears all the saved memory settings.
