IQSDA34
www.snellgroup.com
Controlling the IQSDA34 from the RollCall Control Panel
Issue 2 Rev 3
Page 15
©
2015 Snell Limited
If the
On Input Loss / Mute
option is selected, the output will be muted whenever a
recognized rate is not detected; or, if the On
Input Loss / Pass
option is selected, any
signal standard, frequency, etc... will pass through.
5.2.2 Input Source
On channels 2 and 3, the Input Source selection enables the input sources for outputs 2 and
3 to be specified.
5.2.3 Output 1, Output 2, Output 3
•
Mute:
When selected, this option applies a mute on the output.
•
On Input loss / Mute:
When selected, if the Input signal is lost, the output signal will
be muted.
•
On Input loss / Pass:
When selected, if the input signal is lost, it will be passed
unchanged.
