Snell IQOTR31, Руководство пользователя

Страница: 19 / 24

IQOTR31 www.snellgroup.com Controlling the IQOTR31 from the RollCall Control Panel
Issue 1 Rev 1 Page 19
©
2012 Snell Limited
6.4.2 Log Field Descriptions
Log Field Description
SN= Displays the module serial number.
OS_VERSION= Displays the operating system name and version.
BUILD_NUMBER= Displays the build number.
HARDWARE_VERSION= Displays the hardware version number.
UPTIME= Displays the time since the last restart in the format
ddd:hh:mm:ss.
LICENSED_OPTIONS= Displays any specially licensed options, if applicable.
INPUT_ N _IDENT= Display the input ID.
INPUT_ N _NAME= Displays the input name.
INPUT_ N _TYPE= This displays the type of input as specified by the unit’s
configuration. Valid values are 3G / HD /SD SDI.
INPUT_ N _STATE= Displays the current input state. Valid values are:
• OK
• WARN:Mismatch
• FAIL:Lost
Note: WARN:Mismatch indicates that the input and output
standards are not the same.
INPUT_ N _SDIRATE= Displays the input bitrate.
OUTPUT_1_LASER_BIAS_STATE= Displays the current output 1 laser bias state. Valid values are:
• OK
• WARN:Mismatch
• FAIL:Lost
OUTPUT_1_LASER_BIAS= Displays the bias level, in mA.
OUTPUT_1_TX_POWER_STATE= Displays the current Tx power state. Valid values are:
• OK
• WARN:Mismatch
• FAIL:Lost
OUTPUT_1_TX_POWER= Displays the Tx power in dBm.
OUTPUT_WAVELNGTH= Displays the wavelength in nm.
INPUT_ N _RX_POWER_STATE= Displays the power status. Valid values are:
• OK
• WARN
• FAIL
INPUT_ N _RX_POWER= Displays the Rx power in dBm.