IQOTR31
www.snellgroup.com
Connections
Issue 1 Rev 1
Page 11
©
2012 Snell Limited
3.
Connections
This section describes the physical input and output connections provided by the IQOTR31.
3.1 Optical Input (RX IN)
Optical input (Rx IN) to the module is via a single SC/PC singlemode panel uniter.
3.2 Electrical Input (SDI IN)
Electrical input (SDI IN) to the module is via a single BNC 75 ohm panel jack connector.
3.3 Optical Output (TX OUT)
There is a single optical output from the unit via an SC/PC singlemode panel uniter. The input
source for this output is the SDI IN connector.
3.4 Electrical Outputs (SDI OUT 1)
There are two serial digital outputs via BNC 75 ohm panel jack connectors. The input source
for these outputs is the SDI IN connecor.
3.5 Electrical Outputs (RX SDI OUT)
There are two serial digital outputs via BNC 75 ohm panel jack connectors. The input source
for these outputs is the RX IN connector.
