Snell & Wilcox IQH1S 1U, Руководство по установке

Страница: 58 / 84

IQH1S IU Enclosure SECTION 4
IQH1SOPS 23/11/06 www.snellwilcox.com Version 1 Issue 4 4.13
Access Level
The setup of the active front panel may be
accessed at various levels. At the highest level
(Supervisor) access is allowed to all functions. This
level may only be accessed by entering a
password. At lower levels (User and Engineer)
access is only allowed to a limited number of
functions.
Access Level:
USER
Engineer
Supervisor
Save
Access Level
As supplied the unit will be in a temporary
Supervisor mode with no password protected
access levels.
From the main menu select Set Password
0000
Clear
Preset Save
Set Password
To enter the Supervisor level and set up a
password proceed as follows:
1. Power-down the unit
2. Hold down the Modules button and power-up
the unit. Continue to hold down the button for a
few seconds while powering-up.
3. From the main menu select Access Level
4. Using the spinwheel, select Supervisor and
press Save
5. From the main menu select Set Password
6. The default password will be 0000 To change
the password select the line for digits 1, 2, 3
and 4, and using the spinwheel to select the
desired characters.
Note that only numbers in the rage of 1 to 8
may be used; 0 and 9 cannot be used.
Press Save
The password has now been set.
Selection levels are:
USER Provides access to basic user
controls.
ENGINEER Provides access to more controls
than at user level but less than at
supervisor level.
SUPERVISOR Provides access to all available
control functions.
To set up this function, rotate the spinwheel to the
desired level and select Save.
Note that the number of control functions available
at
the various levels are set by the
software/hardware of the module and are not user-
adjustable.
MAIN MENU
(Supervisor Level)
F/Panel Address
F/Panel Name
Auto Connect
Default Unit
Backlight
Network
Min Unit Addr
Max Unit Addr
Lock Controls
Access Level
Set Password
Software Version
MAIN MENU
(Engineering Level)
F/Panel Name
Backlight
Network
Software Version
MAIN MENU
(User Level)
Backlight
Software Version
Software Version
Software Version:
7.0. .9
OK
Software Version
This shows the Software version number. Press
OK to return to the previous menu.