IQH1S 1U Enclosure
SECTION 4
IQH1SOPS
23/11/06
www.snellwilcox.com
Version 1 Issue 4
4.5
SAVE
This button reveals a list of 8 memory locations and
allows the address of the currently active module to
be saved to one of these memory locations by
pressing the button adjacent to the desired memory
location number.
RECALL
This button reveals a list of 8 memory locations and
allows the saved information to be recalled from
one of the memory locations by pressing the button
adjacent to the desired memory location number.
When selected the module will be reconnected
without the need to select and connect via the
modules list.
HELP
Pressing this button will display warnings in the
windows when applicable.
If an error has occurred (ERROR indicator
illuminated) a message will be displayed in the
control window. Pushing the button adjacent to the
error message will clear it from the list.
If there are no errors the window will display:
No Warnings
LOCK
Pressing this button enables a selected module to
be locked or unlocked to the control panel. This
function will only be available for a unit that is
already connected to the front panel. Other
modules may be still be connected to, and
controlled by the control panel but when the system
is powered-up the control panel will only lock to the
designated default unit allocated in the Set-Up
mode.
The name of the currently selected unit and the
`lock' status. i.e. whether the unit is locked or
unlocked to this control panel, will be shown in the
Information window.
If a unit is locked/unlocked to this control panel
`Lock/unlock' will appear after the units name in the
information window. To change the lock press the
Lock button; this will toggle the text from `lock' to
`unlock' The connection may then be saved to a
memory location by pressing the SAVE button
function.
