Safety and EMC
Page
5
©
2016
SAM
Mains Safety
• Caution: Double Pole/Neutral Fusing (Vega 200 and 400 models).
• This equipment has more than one power supply cord. To reduce the risk of
electrical shock, disconnect all the power supply cords before servicing.
• Isolate the unit from other product outputs before servicing.
• The IEC power inlets are the mains disconnection devices for this unit.
• To reduce the risk of electric shock, plug each power supply cord into separate
branch circuits employing separate service grounds.
• Ensure that all of the router modules and cards are correctly installed and firmly
seated before powering on the Vega router.
Laser Safety EN60825-1 (2001)
• Caution: use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure. Viewing the
laser diode with the optical fiber removed and with the aid of optical magnifiers
may be hazardous.
• This product is a Class 1 laser product
(output power <15mW) at 1270 nm to 1610 nm with a beam divergence >30mrad.
