RollPCI User Manual
Introduction
Issue 3 Rev 1
Page 8
© 2015 SAM
1.
Introduction
1.1 Description
The RollPCI is a network interface card enabling connection between a PC workstation and
the RollNet high-speed 75 ohm co-axial network. The network connection, made with
RG-62/u cable via BNC T-connectors, supports data rates up to 2.5Mbps. BNC-style 75 ohm
terminators must be fitted at either end of a bus.
Supported Operating Systems: Windows 7 (64-bit, 32-bit), XP, Vista, 2000
1.2 Features
Standard plug and play compliant 32-bit PCI card
•
Enables control of SAM products from a PC with RollCall software and 75 ohm
co-axial network
•
Automatic configuration of I/O and interrupt
•
High speed I/O access to RollNet controller
•
Enhanced software capabilities
•
Universal voltage for use in PCI-X slot, or conventional PCI slot
