BTP-P36 User’s Manual
- 38 -
7.2 Cleaning marked sensor
When any of the following cases occur, the marked sensor should be
cleaned.
1)
The printer alarms the paper end during printing.
2)
The printer does not alarm when paper end.
3)
The printer can not read the mark effectively.
The cleaning steps are as follows:
1)
Turn off the power.
2)
Press the cover open button to open the top cover of printer.
3)
Wipe off the dust and stains on the surface of the print head and platen
roller with alcohol cotton ball (it should be wrung out);
4)
Close the top cover of printer until the alcohol evaporates completely.
7.3 Remove paper jam
When any of the following cases occur, remove paper jam.
1)
The printer cannot paper out normally.
2)
Paper feeds with big noises
To remove paper jam manually, follow steps given below:
