BTP-P36 User’s Manual
- 7 -
When the
printer
leave the
factory,
we
can add
the
sensor
and
position configuration according to the requirement. The mark sensor
is located on the left side (paper feed direction) of the paper by default,
and is used to detect the mark of paper front with width of 80 mm,
Figure 1 shows the position.
2) When select the mark paper, we recommended following paramether:
L1 mark height: 2mm≤L1≤8mm
L2mark width:8mm≤L2≤paper width
L3 space between marks:10mm≤L3≤1000mm
