BTP-P36 User’s Manual
- 6 -
Ratings
dropping
resistance
1.5 meters
ESD
Air discharge 10KV, pass
Contact discharge 8KV, pass
Vibration
resistance
can work normally under vibration condition (carry-on or
vehicle travel may have vibration)
Physical
features
Reference
Size
186.5mm×117mm×81.5mm(width x length x height)
Reference
weight
About 638g
（
contain battery
）
2.2Paper specification
2.2.1 Parameters of label paper
Mount paper width: 80±0.5mm/
Label width: 72+0.5mm
Single paper thickness: total thickness. ≤0.16 mm
Label gap: 2mm—5mm
Label length: 10mm—1000mm
2.2.2 Parameters of black label pape
The marked paper should meet the following requirements:
1) Mark position
There are nine positions installed mark sensors which can detect the
mark on the front or back of the paper. A to F positionof sensor to
detect the inner mark of the paper roll. 1 to 5 position of sensor detect
the outer mark of the paper roll. The position of the sensor is shown in
the figure.
