SNBC BK-T6112 Скачать руководство пользователя страница 3

Страница: 3 / 92

BK-T6112 Service Manual

- 2 -

Declaration

This manual is special for embedded printer BK-T6112 and it is not allowed to be modified without

permission. Shandong New Beiyang Information Technology Co., Ltd. (hereinafter referred to as “SNBC”)

reserves the right to improve products as new technology, components, software, and firmware available. If

users need the further data about these products, please feel free to contact SNBC or our distributors.

No part of this document may be reproduced or transmitted in any form or by any means, electronic or

mechanical, for any purpose without the express written permission of SNBC.

This service manual is only provided to the technical support department and first level distributor.

Copyright

Printed in China

Version 1.0

Trademark

SNBC registered trademark is

Warning and caution

Warning: Items shall be strictly followed to avoid injury or damage to body and device.

Caution: Items with important information and prompts for operating the printer.

The following certifications have been approved:

ISO9001 Quality Control System Certification

ISO14001 Environmental Management System Certification

OHSAS18001 Occupational Health and Safety Management System Certification

IECQ QC080000 Hazardous Substance Process Management System Certification

Contact us

Address: No.169 huoju road, high-tech zone, Weihai, China

Hot line: 400-618-1368 800-860-1368

Fax: +86-631-5656098

PC: 264209

Website: www.newbeiyang.com.cn

Содержание BK-T6112





























































































Результаты поиска

Содержание BK-T6112

Отзывы:

Бренды по названию

Популярные бренды

SNBC BK-T6112, Руководство по обслуживанию

Результаты поиска

Содержание BK-T6112

Отзывы:

Бренды по названию

Популярные бренды