Page 26 of 27
Lock Password
Lock password is used to prevent the loss of preferred options from resetting the device. Only users who know the
password will be able to reset the device in case of any problem. Press
Setup
, navigate to
Lock
tab and press
Enter
on your remote control.
To change a password to a new, you have to first key in the old password. By default, the password of the device is set
as 0000 (tetra zero). Once you have given the new password, press
Enter
again to save your settings.
Resetting Device
Device rest will change the device settings to factory defaults. To perform device reset, press
Setup
, navigate to
Options
and select Reset Settings. You have to key in the lock password to perform factory reset.
Firmware Upgrade
Upgrading a firmware on HDTV Receiver is pretty much easier. It’s just a click away. Press
Setup
, navigate to
Option
tab and click
Update Firmware
Firmware update will be performed via USB connectivity. Contact the manufacturer for firmware updates. Once the
firmware has been downloaded, copy the firmware in USB storage device, connect your USB storage with your
HDTV receiver ver and browse the attached storage. Select downloaded firmware file and press
Enter
on your
remote control. Firmware update process takes few minutes to complete. After firmware update, you have to reboot
the device once.
Содержание SZ130X
Страница 1: ......
