Page 22 of 27
Manual Scanning
If your receiver is connected to the antenna and television, you can also scan all channels by manually entering the
parameters.
1:
Press the
Setup
button on the remote control to invoke HDTV Receiver’s setup options.
2:
Using the Remote Control’s direction buttons for
Up/Down
, navigate to the
Channel
tab and press
Enter
.
3:
Select
Search Channel
option and click OK. You will see the following screen
4:
Select Scan type as
Manual Scan
and enter different parameters to scan for the selected channel
5:
Select scan and press
Enter
on the remote control to start searching for channels manually
Once all the channels are scanned, the HDTV receiver is ready to use. At any time if you want to stop scanning, just
press
Stop
on your remote control. Your HDTV receiver will save the scanned channel information till the point
where you stopped scanning.
Содержание SZ130X
Страница 1: ......
