7
•
Place the cast-iron grate on the stove, and ensure it fits into the slots on the gas stove
to keep it in place.
•
Ensure the flame spreads to all burner ports when the burner is lit with the gas tap set
to the minimum position. If some ports do not light, adjust the flow rate as detailed
below.
•
Secondly, ensure the burner remains lit when the gas tap is turned quickly from the
maximum to the minimum position. If the burner does not remain lit, adjust the flow
rate as detailed below.
Adjusting The Flow Rate
•
Ignite the relevant burner, and set to the minimum position.
•
Remove the knob.
•
Using a screwdriver (3mm Ø), turn the screw inside the tap to increase the gas flow as
desired.
Normal Use
•
When al fittings have been completed, open the gas bottle.
•
Choose your preferred burner and press the knob downwards- to activate the gas
flow and sticker both. Turn the knob counter-clockwise to the first position to set the
gas flow.
•
Keep the knob pressed-in and in the first position until the flame burns continuously.
•
To use on a lower setting, turn the knob counter-clockwise position.
•
To switch off, turn the knob in a clockwise position to the top.
•
The Snappy Chef 2-burner Gas Stove is fitted with a safety valve sensor to stem the
gas flow once the flame has died.
Содержание NY-QB2014
Страница 1: ...The CHEAPER FASTER SAFER Way of Cooking...
