Not for
Reproduction
18
800X Series Zero-Turn Rider - 61” & 72” Mower Deck
ferrismowers.com | snapperpro.com
Perform Safety Checks
Functional Tests
1. Check the unit for loose bolts, screws, nuts, etc.
2. Start the engine and check all controls for proper
operation: ground speed control levers, parking brake,
throttle cable, electric PTO clutch, etc.
3. Stop the engine and check for fluid leaks: oil, fuel, gear
and hydraulic oil.
4. If any control fails to operate properly during testing or
seems to be out of adjustment, check and readjust it
according to the following Adjustments section.
WARNING
• Disengage the PTO, stop the engine, set the parking
brake, and wait for moving parts to stop before leaving
operator’s position for any reason.
• If the machine does not pass the test, do NOT operate
the machine. Under no circumstance should you attempt
to defeat the purpose of the safety system.
Safety Interlock System
This unit is equipped with safety interlock switches. These
safety systems are present for your safety, do not attempt
to bypass safety switches, and never tamper with safety
devices. Check their operation regularly.
Operational SAFETY Checks
Test 1 — Engine should NOT crank if:
• PTO switch is engaged, OR
• Parking brake is not engaged, OR
• Ground speed control levers are not in the NEUTRAL
position, OR
Test 2 — Engine SHOULD crank if:
• PTO switch is NOT engaged, AND
• Parking brake is engaged, AND
• Ground speed control levers are locked in the NEUTRAL
position, AND
Test 3 — Engine should SHUT
OFF if:
• Operator rises off the seat with the PTO engaged, OR
• Operator rises off the seat with the parking brake
disengaged.
• Operator moves the ground speed control levers out of
their NEUTRAL positions before disengaging the parking
brake.
• Operator moves the ground speed control levers out of
the NEUTRAL position be positioning the mower deck in
the operating position.
Test 4 — PTO SHOULD shut off if:
• Operator raises the deck from the operating position
with the PTO engaged.
Test 5 — PTO should NOT engage if:
• Operator engages the PTO before the mower deck is in
the operating position.
Test 6 — Blade Brake Check
Mower blades and mower drive belt should come to a
complete stop within seven (7) seconds after electric PTO
switch is turned off (or operator raises from the seat). If
mower drive belt does not stop within seven (7) seconds,
see your dealer.
NOTE: Once the engine has stopped, the PTO switch must
be turned off, parking brake must be engaged, the ground
speed control levers must be locked in the NEUTRAL
position, after the operator returns to the seat to start the
engine.
WARNING
If the unit does not pass a safety test, do NOT operate
it. See your authorized dealer. Under no circumstance
should you attempt to defeat the purpose of the safety
interlock system.
