8
PRE-OPERATION CHECKLIST FOR
TURF CRUISER™/TRAIL CRUISER™ UTILITY VEHICLE
Initial adjustments and operational tests have been performed prior to shipment. Due to possible effects of
shipping, handling and storage, all of the following items must be verified and necessary final adjustments
made at time of setup. It remains good practice and is strongly recommended that all the items also be checked
prior to placing the machine into service. It is very important that setup is verified and all operational tests
completed and results are acceptable. After completing this form, sign and retain for future reference.
SET-UP
_____ GENERAL INSPECTION for loose, missing or damaged components. Repaired as necessary.
_____ FRONT AND REAR WHEELS installed, and LUG NUTS torqued to 75 ft-lb.
_____ FRONT & REAR AXLE NUTS checked, castle nuts installed and secured with cotter pins.
_____ TIRE PRESSURE, FRONT AND REAR, adjusted to 15 PSI.
_____ OPERATOR PROTECTIVE STRUCTURE installed and hardware torqued to 30-35 ft-lb.
_____ BATTERY charged (if needed) and connected properly.
_____ STEERING WHEEL installed.
_____ CARGO BED LATCH STRIKERS adjusted for proper operation.
_____ BRUSH GUARD installed (equipped models only).
_____ OPERATOR CONTROLS checked for binding and damage.
LUBRICATION AND FUEL
_____ ENGINE OIL added to bring level up to full mark (Refer to Engine Manual).
_____ TRANSMISSION FLUID checked and adjusted to full mark. (MOBILFLUID 424)
_____ AXLE COUPLINGS AND STEERING KING PINS greased. (Refer to Operator’s manual).
_____ FUEL added to tank and system checked for leaks. (Refer to Engine Manual for fuel specifications).
OPERATIONAL TEST
_____ ENGINE starts, idles without dying, and runs smoothly.
_____ SAFETY INTERLOCKS all function correctly. (Refer to Operator’s manual).
_____ TRANSMISSION shifts into forward and reverse without excessive grinding of gears.
_____ CLUTCH engages and accelerates smoothly and does not drag at idle.
_____ STEERING functions properly.
_____ SERVICE BRAKE AND PARK BRAKE both function properly. (Refer to Operator’s manual).
CONSUMER INFORMATION
Purchase Date _________________ Model_____________________ Serial No. ____________________
Retailer’s Name _______________________________ Signature ________________________________
Address _________________________________ City _________________ State ______ Zip _____
MACHINE WILL BE USED COMMERCIALLY? (Check one) YES ____ NO_____
Purchaser’s Name _____________________________ Signature ________________________________
Address _________________________________ City __________________ State ______ Zip ______
IMPORTANT: This form is to be retained for future reference regarding Warranty, proof of
purchase, traceability for product recall or service, etc. Complete the Product Registration
Card and Mail to Customer Service Department at SNAPPER, P.O. BOX 1379, McDonough,
Georgia, 30253.
INSTRUCTION No. 7026163 (Rev. 3, 9/23/2005)
TP 300-5106-3-GC-N
