Snapper SLT23460 (7800342) Скачать руководство пользователя страница 16

Страница: 16 / 48

How to Use the Cruise Control

To engage the cruise control:

1. Slowly push the

speed control pedal

forward to the

desired speed (Figure 12).

2. Pull up on the

cruise control knob

(Figure 13). Release

the

speed control pedal

. The unit should continue

traveling forward at the desired speed.

NOTE:

The cruise control only operates in forward

speeds.

To disengage the cruise control:

1. Push the

speed control pedal

(Figure 12), OR

2. Push the

brake pedal

WARNING: Do not engage the cruise control when
driving on slopes, or when people or animals are in
the vicinity.

Figure 13: Cruise control

A - Cruise Control knob

How to Drive in Reverse

1. Look to the rear.

2. Slowly push the

speed control pedal

to the REVERSE

position.

How to Change Direction

CAUTION: To change directions, do not use the left brake
pedal. Use only the speed control pedal.

1. Slowly remove your foot from the

speed control pedal

The

speed control pedal

will automatically return to the

NEUTRAL position.

2. When the unit stops, slowly move the

speed control

pedal

to the desired direction.

Speed Control Pedal Positions

The forward speed is controlled by the position of the

speed

control pedal

. The following chart provides functions along

with the

pedal positions

. Always operate the engine with the

throttle control

in the

FAST

position.

How to Disconnect the Transmission

To push the unit, use the

automatic drive disconnect

release the transmission. The

automatic drive disconnect

located on the right rear of the unit.

1. The engine must be off.

2. Pull out and lock the

automatic drive disconnect

in the

PUSH position (Figure 13). The transmission is now
released and the unit can be pushed.

NOTE:

In cold weather, the heavy viscosity oil in the

transmission will make the unit difficult to push.

3. To engage the transmission, unlock and push in the

automatic drive disconnect

. The transmission is now

connected and ready to operate.

Function

Pedal Positon

Throttle Position

Trimming
Snow Thrower

1/3

Fast Throttle

Bagging Grass

1/3 to 1/2

Normal Mowing

1/2 to 2/3

Easy Mowing
Snow Blade

1/2 to 3/4

Transport

FULL

Pull Behind
Attachments

1/3 to 1/2

www.snapper.com

English

Содержание SLT23460 (7800342)

















































Результаты поиска

Содержание SLT23460 (7800342)

Отзывы:

Похожие инструкции для SLT23460 (7800342)

Бренды по названию

Популярные бренды

Snapper SLT23460 (7800342), Инструкции по безопасности и руководство оператора

Результаты поиска

Содержание SLT23460 (7800342)

Отзывы:

Похожие инструкции для SLT23460 (7800342)

Бренды по названию

Популярные бренды