background image

2

!

!

IMPORTANT SAFETY INSTRUCTIONS

WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can
cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury
or death to the operator or other persons. The owner of the machine must understand these instructions and
must allow only persons who understand these instructions to operate machine. Each person operating the
machine must be of sound mind and body and must not be under the influence of any substance, which might
impair vision, dexterity or judgment. If you have any questions pertaining to your machine which your dealer can-
not answer to your satisfaction, call or write the Customer Service Department at SNAPPER Products Inc.,
McDonough, Georgia 30253. Phone: (1-800-935-2967).

PROTECTION FOR CHILDREN 

Tragic accidents can occur if the operator is not alert
to the presence of children. Children are often attract-
ed to the machine and the mowing activity. Children
who have been given rides in the past may suddenly
appear in the mowing area for another ride and be run
over or backed over by the machine. Never assume
that children will remain where you last saw them.

1.

KEEP children out of the mowing area and under the
watchful care of a responsible adult other than the opera-
tor. 

2.   DO NOT allow children in yard when machine is operated

(even with the blade OFF). 

3.   DO NOT allow children or others to ride on machine,

attachments or towed equipment (even with the blades
OFF). They may fall and be seriously injured. 

4.  DO NOT allow pre-teenage children to operate machine.
5.  ALLOW only responsible adults & teenagers with mature

judgment under close adult supervision to operate
machine. 

6.  DO NOT operate blades in reverse. STOP BLADES. LOOK

and SEE behind and down for children, pets and hazards
before and while backing.

7.  USE EXTRA CARE when approaching blind corners,

shrubs, trees, or other objects that may obscure vision. 

PROTECTION AGAINST TIPOVERS 

This machine is equipped with a roll bar protective
structure, which, when used properly, can offer addi-
tional security to the operator in the event of a tip-over
accident. For proper protection, the roll bar must be
raised and locked and the lap-style seat belt must be
worn at all times. 
Slopes are a major factor related to loss-of-control and
tip-over accidents, which can result in severe injury or
death. All slopes require extra CAUTION. If you cannot
back up the slope or if you feel uneasy on the slope,
DO NOT mow it. Use extra care with grass catchers or
other attachments; these affect the handling and the
stability of the machine. 

1.  DO NOT operate machine on slopes exceeding 15

degrees (27% grade).

2.  Exercise EXTREME CAUTION on slopes above 10

degrees (18% grade). Turn blades OFF when traveling
uphill. Use a slow speed and avoid sudden or sharp turns. 

3.  DO NOT operate machine back and forth across face of

slopes. Operate up and down. Practice on slopes with
blades off.

PROTECTION AGAINST TIPOVERS 

(Continued From Previous Column)

4.  AVOID starting, stopping or turning on slopes. If machine

stops going uphill or tires lose traction, turn blades OFF
and back slowly straight down the slope. 

5.   STAY ALERT for holes and other hidden hazards. Tall

grass can hide obstacles. Keep away from ditches,
washouts, culverts, fences and protruding objects. 

6.   KEEP A SAFE DISTANCE (at least 3 feet) away from edge

of ditches and other drop offs. The machine could turn
over if an edge caves in. 

7.   Always begin forward motion slowly and with caution.
8.   Use weights or a weighted load carrier in accordance with

instructions supplied with a grass catcher. DO NOT oper-
ate machine on slopes exceeding 10 degrees (18% grade)
when equipped with grass catcher.

9.   DO NOT put your foot on the ground to try to stabilize the

machine. 

10.  DO NOT operate machine on wet grass. Reduced traction

could cause sliding. 

11.  Chose a low enough speed setting so that you will not

have to stop or shift on a slope. Tires may lose traction on
slopes even though the brakes are functioning properly.

12.  DO NOT operate machine under any condition where trac-

tion, steering or stability is doubtful.

13. Always keep the machine in gear when going down

slopes. DO NOT shift to neutral (or actuate hydro roll
release) and coast downhill.

14. DO NOT remove or modify any part of the roll bar protec-

tive structure. Do not fold the roll bar unless absolutely
necessary. There is no roll-over protection when the roll
bar is folded. 

15. Operator must be properly seated at all times, and must

wear seat belt, snuggly fastened, at all times except when
roll bar is folded.

16. DO NOT exceed the machine weight rating specified on

the roll bar protective structure’s identification plate.

PREPARATION

1.   Read, understand, and follow instructions and warnings

in this manual and on the machine, engine and attach-
ments. Know the controls and the proper use of the
machine before starting.

2.   Only mature, responsible persons shall operate the

machine and only after proper instruction. 

Содержание CZT19481KWV









































Отзывы: