Snapper 5900935 Скачать руководство пользователя | Manualshive

Страница: 38 / 60

background image

36

www.SnapperPro.com

Servicing the Mower Blades

Removing the Mower Blade

1. To remove the mower blade, wedge a wooden

block between the mower blade and the mower
deck housing to keep the blade from turning and
remove the mower blade mounting bolt with a
15/16” wrench (Figure 33).

Inspecting the Mower Blade

1. Remove the mower blade from the unit.

2. Inspect the mower blade (Figures 34 & 35).

Discard the mower blade if it has any of the below
conditions:

A.) Has more than .5” (12,7 mm) of the mower

blade metal removed from previous sharpening or
wear (D, Figure 34).

B.) The air lifts are excessively eroded (B & C,

Figure 35) and the notch (C) is .25” (6,35 mm)
deep or greater.

C.) Mower blade is bent or broken.

3. If the cutting edges are not sharp or have nicks,

sharpen the blades. See SHARPENING THE
MOWER BLADES.

CAUTION

Avoid injury. Mower blades are sharp.

• Always wear gloves when handling mower
blades or working near blades.

DANGER

Avoid injury. A worn or damaged blade can
break, and a piece of the mower blade could be
thrown into the operator’s or bystander’s area,
resulting in serious personal injury or death.

• Inspect the mower blade every 25 hours or at
least once a year.

• If the mower blade hits a solid object, stop
the engine immediately and inspect the mower
blade.

• Never weld or straighten bent mower blades.

Figure 33. Loosening the Mower Blade for Removal

Figure 34. Inspecting the Mower Blade Tips
A. Mower Blade Cutting Edge
B. Square Corner
C. Air Lift
D. Wear Measurement - DISCARD Mower Blade If

greater than .5” (12,7 mm)

B

D

C

A

C

A

A

B

C

Figure 35. Inspecting the Mower Blade Air Lifts
A. New Mower Blade
B. Mower Blade at Wear Limit (A notch begins to form)
C. Mower Blade in Dangerous Condition (Notch measures .25” (6,35 mm) or greater DO NOT USE. Replace

with new mower blade.)

Regular Maintenance

Not

for

Reproduction

«
...
36
37
38
39
40
...
»

Содержание 5900935





























































Отзывы:

Нет отзывов

Похожие инструкции для 5900935

Бренд: Walker Страницы: 100

Бренд: Lastec Страницы: 56

Бренд: Cub Cadet Страницы: 56

Бренд: Powerplus Страницы: 18

Бренд: Sabo Страницы: 92

Бренд: Qualcast Страницы: 29

Бренд: Simplicity Страницы: 26

Бренд: Feider Machines Страницы: 22

Бренд: Flymo Страницы: 10

Бренд: P.Lindberg Страницы: 123

Бренд: Honda Страницы: 24

Бренд: Poulan Pro Страницы: 48

Бренд: Jonsered Страницы: 44

Бренд: Toro Страницы: 4

Бренд: Poulan Pro Страницы: 48

Бренд: Schulte Страницы: 176

Бренд: Toro Страницы: 28

Бренд: Wheel Horse Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды