Snapper 5900935 Скачать руководство пользователя | Manualshive

Страница: 15 / 60

background image

13

Control Functions

The information below briefly describes the function of individual controls. Starting, stopping, driving, and
mowing require the combined use of several controls applied in specific sequences. To learn what combination
and sequence of controls to use for various tasks see the OPERATION section.

Ground Speed Levers

These levers control the ground speed of the rider.
The left lever controls the left rear drive wheel and
the right lever controls the right rear drive wheel.

Moving a lever forward increases the FORWARD
speed of the associated wheel, and pulling back on a
lever increases the REVERSE speed.

Note: The further a lever is moved away from the
neutral position the faster the drive wheel will turn.

See the Operating the Zero Turn Rider section for

steering instructions.

Features and Controls

Parking Brake

DISENGAGE

Releases the parking brake.

ENGAGE

Locks the parking brake.

Pull the parking brake lever back to engage the
parking brake. Move the lever fully forward to
disengage the parking brake.

NOTE: To start the unit

the parking brake must be engaged.

Fuel Tank Cap

To remove the cap, turn counterclockwise.

Fuel Level Gauge

Displays the fuel level in the tank.

Seat Adjustment Lever

The seat can be adjusted forward and back. Move
the lever to the left, position the seat as desired, and
release the lever to lock the seat into position.

Features and Controls

Not

for

Reproduction

«
...
13
14
15
16
17
...
»

Содержание 5900935





























































Отзывы:

Нет отзывов

Похожие инструкции для 5900935

Бренд: Walker Страницы: 100

Бренд: Webb Страницы: 28

Wildcat STWC48V-25CV

Бренд: Scag Power Equipment Страницы: 82

Бренд: GreenWorks Страницы: 164

Бренд: Jacobsen Страницы: 76

Бренд: Grizzly Страницы: 148

Бренд: Ferris Страницы: 48

Бренд: Kubota Страницы: 299

Бренд: Snapper Страницы: 52

Бренд: Salsco Страницы: 29

Бренд: Toro Страницы: 20

Бренд: Honda Страницы: 30

Бренд: Toro Страницы: 60

Бренд: Wolf Garten Страницы: 28

Бренд: EINHELL Страницы: 168

Бренд: Jacobsen Страницы: 78

Radius E Series

Бренд: Exmark Страницы: 84

Бренд: MGG Страницы: 96

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды