Not
for
Reproduction
EN
AR BG CS DA DE ES ET FI FR HR HU IT LT LV NL NO PL PT RO RU SK SL SR SV TR UK
English (original instructions)
17
PROBLEM
POSSIBLE CAUSE
SOLUTION
The handle is not in
position.
The bolts are not engaged
correctly.
Adjust the height of the handle and
make sure that the knobs and bolts
are aligned correctly.
The machine does
not start.
The battery capacity is
low.
Charge the battery pack.
The battery pack is too
cold.
Charge the battery pack for 10
minutes in warm area, or when the
charging light turns green.
The battery pack is not
attached to the engine.
Check the connection between the
engine connector and the battery
pack.
The bail switch is
defective.
Replace the bail switch, or speak to
the authorized service center.
The auger barely
rotates.
The auger or discharge
chute is blocked or
damaged.
1. Clean the auger and discharge
chute. (Don't do this by hands.)
2. Replace the auger.
The capacitor is defective. Speak to the authorized service
center.
Excessive vibrations
There are loosen parts.
Tighten correctly all the fasteners
and caps.
The auger or engine is
damaged.
Replace the damaged parts.
The unit is on, but
the auger does not
turn.
The belt is damaged.
Replace the belt.
A thin layer of snow
stays behind.
The scraper is damaged.
Replace the scraper.
TROUBLESHOOTING