!
10. How to install car seat for Group I (9-18kg,
approx. 9mths to 4 years)
9
10
Step 1: Place the car seat forward
facing on the vehicle seat. Make
sure it is resting firmly against the
vehicle seat backrest.
Step 2: Pull out the vehicle
3-point seat belt.
Step 3: Pass the vehicle seat belt through the lap belt guide slot
under the armrest.
Step 4: Pass the vehicle shoulder belt through the slot under the headrest.
Step 5: Pass the vehicle seat belt through the seat belt perforation to the back
of the car seat. Pass the seat belt through the seat belt perforation on the other
side to the front of the car seat.
Step 6: The vehicle seat belt should go through the lap belt route
slot under the armrest on the other side of the car seat.
Step 7: Fasten the seat belt into
the buckle. Tighten the seat belt
and remove any slack.
Step 8: Place your child into the
car seat and secure him with the
5-point harness.
Important: Do not use any load bearing contact points other than those
described in the instructions and marked on the child restraint.
