9
4.3 First Ride
For your first ride,
1.
You need to fully charge your battery before use.
2.
Ensure the battery key is in LOCKED position
3.
Press and hold the power button on the display control pad located on the left handlebar
until the display turns on
4.
Select your preferred level of pedal-assist using the +(UP) and
–
(DOWN) button on the
display control pad, with Level 1 being the lowest , and Level 5 being the highest. Level 0
provides no assistance to the rider.
5.
You will find a half-twist throttle on the right handlebar next to the right handlebar grip. Set
the pedal assist level to 0. Twist the throttle backwards slowly depending on the speed and
acceleration you wish to have. The further you twist the throttle from its original position,
the more power you will have from the motor propelling the ebike forward.
6.
When the ebike comes to a complete stop, turn off the power by long pressing the power
button on the display control pad until the LCD display turns off. This is to ensure that the
motor will not be accidentally activated.
CAUTION: when you are not riding the bike, but with the power on, be careful not to
accidentally twist the throttle, which may throw you off balance and cause serious harm,
injury or death.
7.
To turn on the headlight, press and hold the UP button to turn on the display control pad. To
turn off the headlight, press and hold the UP button again.
8.
To turn on the taillight, you need to remove the plastic battery strip by pulling it away from
the taillight, which will connect the battery to its power terminals in the taillight. Short press
the button on the taillight to turn on its FLASHING mode, short press it again to switch to ON
mode, and short press again to turn it off.
4.4 Bike Display and Controls
4.4.1
Functional Description of the Display
Mileage
BMS indicator
Battery indicator
Speed mode
Mileage mode
Speed display
ERROR indicator
PAS level
Power indicator
Lamp
