SNAP Mirage Autonomic MAS M-801e, Руководство пользователя

Страница: 8 / 19

5
Rear Panel Guide
1. AC Inlet
IEC socket.
2. Speaker Terminals
Plug in terminal clamp connectors
accept 1.5mm² speaker wires.
3. Coax Digital Input Terminals
Coax digital (SPDIF) inputs.
4. Coax Digital Source Output Terminals
Coax digital outputs for expansion to
further amplifier zones.
5. USB for Programming
USB mini B socket for firmware updates.
6. Ethernet Port – MAIN IN
MAIN IN is 10/100 Base T primary Ethernet
port for connection to the Home network.
7. Ethernet Port – EXT OUT
EXT OUT is 10/100 Base T secondary
port for connection to another eSeries
Amplifier’s "MAIN IN" Ethernet Port.
8. Zone Pre Amplifier Out
Analog Audio L/R zone 7 & 8 outputs
9. Analog Input Terminals
Analog audio L/R inputs
10. IR Emitter Ports
3.5mm mono jacks. IR9 & IR10 ports
output the combined IR1 – IR6 infra-red
strings. Ports are not usable but are
future ready for IR routing.
11. Optical Digital Inputs
Optical (TOSLINK) digital inputs.
12. Controller Interface
For connection to keypads and IR receivers.
8 controller interface ports - RJ45 sockets.
13. AMP ON Control
AMP-ON 1 - 8 output 12VDC when
Zone is ON.
14. PRESETS – Door Bell
12 – 24V AC/DC powered doorbell
trigger terminals.
1
2 3 4 5 6 7
10 13 12 14 9 11 8