SNAP Mirage Autonomic MAS M-801e, Руководство пользователя

Страница: 10 / 19

7
Typical System Configuration (Continued)
Fig. 1 depicts a typical configuration where
the M-801e amplifier is providing audio
into six of the possible eight listening zones.
Only three of the zones are depicted.
Each zone consists of a room with
a pair of speakers and a suitable
controller. Each zone may be listening
on any of the connected sources:
• Autonomic Media Server
• Satellite Receiver
• Tuner
• CD Player
Controllers
Each zone has a specific control
requirement. Choose controllers
that best suit the application.
Zone 1 – The Gym: Speakers & KP-6 Keypad
Zone 2 – The Study: Speakers &
KP-iOS Keypad
Zone 3 – The Lounge: Speakers & Tablets
1. The KP-6 Keypad may be plugged into
any of the four controller ports.
2.
Source control IR emitters are plugged
into the IR ports. There are ten IR ports:
IR1 - IR8, and IR9 & IR10.
3.
IR 1 – 8 route source specific IR signals
from connected controllers, while IR9 &
IR10 output the common IR or the sum
of all received IR signals.
4. These ports may be used for source
equipment that is common to all zones.
When controlling a stand alone M-801e
using an iPad or other web tablet, the
M-801e must be connected to a wi-fi
enabled ethernet router and the web tablet
browser must be directed to the M-801e’s
IP Address. The M-801e’s web application
also provides source control functionality.
Speakers
Speakers in each zone are connected to the
amplifier by "Home Run" speaker cables.
Source Equipment
The M-801e amplifier has eight stereo
RCA audio inputs for connecting
to source equipment. These input
channels feature coax digital inputs.
If a signal is present on the digital input,
it takes precedence over the analog
input. There are four additional Digital
only input channels featuring both coax
and Optical inputs. Any source can be
listened to in any zone, simultaneously.
All eight zones may select the same
source, in such circumstances there is
a possibility that all eight zones may
be trying to control that source (not
always desirable) so a system should be
well planned and where appropriate
additional source equipment installed.
Preamplifier Zone Outputs
The preamplifier output zones are completely
independent of the digital amplifier zones.
These can optionally be used for locations
where a high or lower power amplifier /
speaker would be required. A third party
power amplifier is required to power the
zone speakers. Alternatively a preamplifier
zone may be zone linked to one of the
digital amplifier zones, and provide line
level outputs to the zones sub-woofer.
Autonomic Media Server
When pairing your M-801e amplifier with a
Autonomic Media Server, be sure to use the
Media Server’s web configuration Sources
page and follow the pairing process there.
This will ensure full control via the MMS iOS
and Android applications.