7. Speaker Shorts
Under no circumstances should the
speaker output terminals of the unit be
short circuited, grounded or connected
to another output.
8. Direct Sun light
Avoid installing the amplifier in posi-
tions where the front panel is exposed
to direct sunlight – may cause control
to become sluggish.
9. Controller Connection
Never connect more than eight
Autonomic controllers. The supply is
internally fused (self-resetting) and may
open circuit. Never connect the unit’s
12VDC terminal (‘Bus Run’ port) to an
external power supply.
Declaration of Conformity
We declare under our sole responsibility that
this product, to which this declaration relates,
is in conformity with the following standards:
• EN60065
• EN55013
• EN55020
• EN61000-3-2
• EN61000-3-3
Following the provisions of Low Voltage Directive
2006/95/EC and EMC Directive 2004/108/EC, the EC
regulation 1275/2008 and its frame work Directive
2009/125/EC for Energy-related Products (ErP).
TUV Certification
This product has been certified and
conforms to UL60065 and certified
to CAN/SSA, IEC 60065.
For North American Models
FCC interference statement
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that
may cause undesired operation.
IMPORTANT!
Changes or modifications not expressly
approved by the party responsible
for compliance could void the user’s
authority to operate the equipment.
NOTE:
This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the
user is encouraged to try to correct the
interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
For Canadian Models
NOTE:
THIS CLASS B DIGITAL APPARATUS
COMPLIES WITH CANADIAN ICES-003.
For models having a power cord
with a polarized plug:
CAUTION:
TO PREVENT ELECTRIC
SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT FULLY INSERT.
Modèle pour les Canadien
REMARGUE:
CET APPAPEIL NUMÉRIQUE
DE LA CLASSE B EST CONFORME À LA
NORME NMB-003 DU CANADA.
Sur les modèles dont la fiche est polarisée:
ATTENTION:
POUR ÉVITER LES CHOCS
ÉLECTRIQUES, INTRODUIRE LA LAME
LA PLUS LARGE DE LA FICHE DANS
LA BORNE CORRESPONDANTE DE LA
PRISE ET POUSSER JUSQU’AU FOND.
A Note About Recycling
This product’s packaging materials are
recyclable and can be reused. Please
dispose of any materials in accordance
with the local recycling regulations.
When discarding the
unit, comply with local
rules or regulations.
Batteries should never
be thrown away or
incinerated but
disposed of in
accordance with the
local regulations concerning battery disposal.
This product and the supplied accessories
constitute the applicable product
according to the WEEE directive.
2
Содержание Mirage Autonomic MAS M-801e
Страница 1: ...MAS m 801e 4 room Digital Amplifier with eAudioCast ...
Страница 2: ......
