47
OBD-II/EOBD
OBD Diagnose
($06) Specific Monitored Systems
This selection opens a menu of available test results on monitored systems. The data available is
for specific systems and components that the onboard diagnostic system either continuously
monitors, such as misfire, or non-continuously monitors, such as the catalyst system. Making a
selection displays the test results.
($07) DTCs Detected During Last Drive
This selection opens a record of any DTCs that set during the last completed drive cycle. Select
to open the DTC list.
($08) Request Control of On-board System
This service enables bidirectional control of the ECM. The purpose of this service is to allow the
Scanner to control the operation of an onboard system, test, or component. Select a test and
follow the on-screen instructions.
($09) Read Vehicle Identification
The purpose of this service is to enable the Scanner to request and display vehicle-specific
information, such as the vehicle identification number (VIN), the calibration identification, and the
calibration verification number (CVN), of the test vehicle. Select a menu item to retrieve the
identification information. Select
Return
to go back to the menu.
($09) In-use Performance Tracking
This selection displays the “In-use Performance Tracking” of data. It is basically a record of the
number of times each of the monitor tests have been completed. Select
Return
to go to the menu.
Figure 6-8
Sample performance tracking display
Содержание SOLUS Ultra
Страница 1: ...User Manual EAZ0075L19B Rev B 1 H 18 UK ...
