Snap-On MIG200i, Руководство пользователя

Страница: 9 / 20

9
ASSEMBLING THE UNIT cont'd
• Stainless Steel 308L
This is typically used to repair many applications in-
cluding stainless steel tanks and containers with a
thickness of .031" to .177".
• Aluminum (AlMg5-5356 and AlSi12-4047)
It is possible to weld on thicknesses of .031" to .276".
Therefore this is widely used in the car body repair, but
also to repair boats and other aluminum structures.
• CuSi3 (Silicon Bronze) MIG Brazing
It is possible to work on galvanized sheets of .024" to
.197".
The main applications is therefore the car body repair,
but it can also be used for repairing other galvanized
structures within the maximum thickness.
QUICK START GUIDE
1- TURN ON THE WELDER USING THE ON/OFF
SWITCH.
When the machine is
switched on, for a few
moments the display screen
A
displays: the model
number of the machine, the
version and development
date of the software, and the release number of the
synergic curves.
The display screen
A
will then show the synergic curve
used, the start mode
2T, 4T ,3L the welding current, the speed of the welding
wire in inches/min, the welding voltage, the thickness of
metal to weld in inches and the welding process
short
MIG
or
pulse
MIG
To increase or decrease the welding parameters, simply
adjust by means of knob
B
. The values all change
together in a synergic way.
2- SET THE WIRE SIZE AND WELDING GAS
To access these functions, we must start from the main
display page and press the knob
B
for at least 2 seconds.
To enter the function, simply select it by means of the knob
B
and press it for less than 2 seconds. To return to the main
display page, press the knob
B
for at least 2 seconds.
Select the wire material, wire size and shielding gas to be
used. Return to the main menu by pushing the knob for
at least 2 seconds.
3- SET THE THICKNESS OF THE METAL BY TURNING
KNOB
B