Snap-On EEWH315A, Руководство по эксплуатации

Страница: 16 / 52

EEWH315A and 317A Tire Changer Operation Manual
Page 16 Operation Manual
3.1 PRESETTING OF CLAMPING JAWS
MAKE SURE ALL FOUR CLAMPING JAWS ARE
POSITIONED IDENTICALLY (FIG. 3.1-1, ITEMS 1 OR
2). OTHERWISE THE RIM MIGHT NOT BE
CLAMPED PROPERLY, COME OFF THE CHUCK
AND HURT THE OPERATOR!
A Depress first pedal from the left smoothly up to
the centre position. If the pedal is released the
clamping jaws stop in the position they have
reached at the time.
B Set the clamping diameter according to the
dimensions of the rim.
Rim diameters are shown in inches on the turntable ( A ,
Fig. 3.1-1). The setting diameter (scale on the jaw - B -
corresponding to the scale on the turntable - A -) depends
on the position of the jaws ( 1 , or 2 , Fig. 3.1-1).
1115
Fig. 3.1-1
C To reposition the jaws free the lock pin by
applying pressure on the lever ( C ) on the right side
of each jaw. Slide the jaws towards the required
position and release the lever: make sure the jaw is
now locked firmly. Repeat the procedure on all the
turntable jaws.
With the jaws in position 1 (1, Fig. 3.1-1), the operative
diameter is exactly as indicated by the scale ( A-B ) on
the turntable.
With the jaws in position 2 (2, Fig. 3.1-1), add 4” to the
value represented by the scales to obtain the effective
setting diameter.
G Press bead-seater pedal on left side of the
machine ( 5 , Fig. 3.0-1 / 1 , Fig. 3.0-2) halfway down:
This will allow activate the tire inflation line
( 2 )
.
Figure 3.0-2
H
Simultaneously press bead-seater pedal ( 1
Fig.3.0-2) down swiftly and the button ( 3 ), to get air
blast from the Nozzle ( 4 ). Air simultaneously comes
out of inflator hose ( 2 ) and Nozzle ( 4 ).
WARNING!!
WHEN OPERATING THE BEAD SEATER IT IS
MANDATORY TO WEAR SAFETY GLASSES TO
PROTECT EYES.