88
Scope Multimeter Operations
Operations
Units Settings
The Units dialog box allows you to switch between Full Scale or Per Division settings for the trace
setup and the display settings. Selecting Full Scale configures the units to the full viewing area of
the screen, while Per Division adjusts the units to a single division (one tenth) of the screen.
The selected radio knob on the Units dialog box shows which setting is active. Use the stylus to
switch between settings (
).
Figure 8-27 Sample View Units dialog box
Setup Controls
Basic tool settings are adjusted here.
z
To adjust setup controls:
1.
Select Setup from the Scope Multimeter toolbar.
The Scope Multimeter Preferences dialog box opens
2.
Select Setup from the dialog box.
A submenu of options displays:
–
Back—use to return to the Preferences dialog box
–
Units—use to set how measurement values display, US standard or metric
–
Snapshot—use to adjust the percentage of data captured following a trigger event
–
Ignition—use to configure the ignition scope for the test vehicle
Selecting from the submenu opens a dialog box for that item. Dialog box options for each item
are discussed in the following sections.
3.
Make dialog box selections as needed.
4.
Select Exit to close the dialog box and return to the scope.
Units
Selecting Units opens the Setup dialog box. The units of measurement can be changed between
US customary or metric. The selected radio knobs on the Setup dialog box show which settings
are active (
).
Содержание D10
Страница 1: ...User Manual August 2012 EAZ0077L00A Rev B ...
