Snap-On BK6500, Руководство пользователя

Страница: 19 / 120

Digital Video Scope
19
Snap-on
SYMPTOM POSSIBLE REASON SOLUTION
Display Unit does not
display image from
imager handle
The imager is not inserted into the
imager handle Connect imager securely to
imager handle
LCD screen is black,
but Display Unit is ON
Video out cable is inserted Remove cable
Unit will not switch on Battery is very low
Charge unit until Green charge
LED illuminates.
Battery does not hold
a charge
Faulty battery
Return unit to appropriate service
center location.
Units will not charge
Power supply is not plugged in.
Connect power supply to AC
supply and to BK6500
Battery is too hot Allow unit to cool
LED on imager is ON
but no image
Broken video signal wire
Test with second imager if
available. Return to appropriate
service center location
Image on display is
frozen
Processor locked up Cycle power
Charging LEDs flash
red/green
Faulty battery
Return unit to appropriate service
center location.
Charging LED glows
amber
Battery is low Charge until Green LED illuminates
Troubleshooting
Warranty
Limited Two (2) Year Warranty Snap-on Tools Company (the “Seller”) warrants only to the original purchaser that under normal use, care and service,
the Equipment (except as otherwise provided herein) shall be free from defects in material and workmanship for two years from the date of original in-
voice. SELLER’S OBLIGATIONS UNDER THIS WARRANTY ARE LIMITED SOLELY TO THE REPAIR OR, AT SELLER’S OPTION,REPLACEMENT
OF EQUIPMENT OR PARTS WHICH TO SELLER’S SATISFACTION ARE DETERMINED TO BE DEFECTIVE AND WHICH ARE NECESSARY IN
SELLER’S JUDGMENT, TO RETURN THIS EQUIPMENT TO GOOD OPERATING CONDITION. NO OTHER WARRANTIES, EXPRESS OR IMPLIED
OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, SHALL APPLY AND ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. This warranty does not cover (and separate
charges for parts, labor and related expenses shall apply to) any damage to, malfunctioning,in operability or improper operation of the Equipment
caused by, resulting from or attributable to (A) abuse, misuse or tampering;(B) alteration, modification or adjustment of the Equipment by other than
Seller’s authorized representatives; (C) installation, repair or maintenance (other than specified operator maintenance) of the Equipment or related
equipment, attachments, peripherals or optional features by other than Seller’s authorized representatives; (D) improper or negligent use,application,
operation, care, cleaning, storage or handling; (E) fire, water, wind, lightening or other natural causes; (F) adverse environmental conditions, including,
without limitation, excessive heat, moisture, corrosive elements, or dust or other air contaminants, radio frequency interference, electric power failure,
power line voltages beyond those specified for the Equipment, unusual physical, electrical or electromagnetic stress and/or other condition outside
of Seller’s environmental specifications;(G) use of Equipment in combination or connection with other equipment, attachments, supplies or consum-
able not manufactured or supplied by Seller; or (H) failure to comply with any applicable federal, state or local regulation,requirement or specification
governing emission analyzers and related supplies or consumables. Repairs or replacements qualifying under this Warranty will be performed on
regular business days during Seller’s normal working hours within a reasonable time following purchaser’s request. All requests for Warranty service
must be made during the stated warranty period. This Warranty is nontransferable.