Snap Fresh BBT-ZE20ST, Руководство пользователя

Страница: 17 / 20

17
• To check the battery charge status, push the button (6) on battery shortly.
• The battery has 3 lights indicating the charge level, the more lights that burn, the more charge
the battery has left.
• When the lights are not burning it means the battery is empty and must be charged immediately.
• Take the battery (2) from the machine.
• Turn the battery (2) to upside down position and slide it onto the charger (8) as shown in Fig. D.
• Push the battery until it is fully pushed into the slot.
• Plug the charger plug into an electrical outlet and wait for a while. The LED indicators (10)
charger (13) will lighten up and show the charger status.
• Fully charging the 2Ah battery may take up to 60 minutes.
• Fully charging the4 Ah battery may up to 120 minutes.
After the battery is fully charged remove the charger plug from the outlet and remove the battery
from the charger.
The LED indicators (9) will lighten up and show the charger status.
Red LED Status
Off
Off
Off
On
On
Off No power
Standby mode:
-No battery is
inserted or,
-Battery inserted
but charging has
finished
Battery charging in
progress
Green LED status Charger status
Checking the battery charging status
Charging the battery with the charger
Before any work on the power tool, remove the battery.
The battery must be charged before first use.
When the machine is not being used over a longer period of time it is best to store the battery
in charged condition.