Rewinding The Spool
.
.
The spool is supplied with the line pre-wound. The twisted line is 1.65mm (0.065”) in diameter,
which gives good cutting performance and reduced noise. Follow the instructions below to rewind
new line onto the spool.
To remove the string head, press and hold the shaft lock button and unscrew the head
anti-clockwise.
Cut a piece of nylon line 1.65mm (0.065”) in diameter maximum 4m long (you may find it easier to
practice with a shorter line length at first). Find the centre of the line and loop it onto the notch in
the centre flange of the spool. Wind the line around the spool, in the direction indicated by the
arrow on the spool, keeping each end of the line in its own channel. Keep the line tight as you wind
so that the line coils smoothly onto the spool.
Wrap the line around the spool leaving about 20cm line exposed on each side.
12
Trimmer Line
Step 1
Step 2
Содержание BBT-ZE20ST
Страница 20: ......
