SNAIGE RF59FB-TN00NE0, Руководство пользователя

Страница: 24 / 32

23
Exiting the Fast-Freezing function:
NOTE: After a cumulative running period of 26 hours, the Fast Freeze function will exit
automatically.
Under the Fast Freezing mode, press the Function key to select Fast Freezing until the
corresponding icon
3 gets flickering, and then press the OKkey for confirmation, the
Fast Freezing function will get exited.
NOTE: When the Smart ECO function is enabled, the Fast-Freezing function will be
disabled automatically.
Vacation
When the Vacation function is enabled, the freezer temperature will be controlled at
+14
℃
. When you are out for a quite long time, you can set the Vacation function to
keep the refrigerator running with low energy consumption, while ensuring the fresh
food compartment is free from undesirable smell and the freezer compartment operates
normally.
NOTE: Be sure to take out all foods from the fresh food compartment before setting this
function.
Under the Vacation mode, the fridge temperature is subject to no change.
Enabling the Vacation function:
Press the Function key to select Vacation until the corresponding icon 4 gets flickering,
and then press the OK key within 5s for confirmation. If the OK is not pressed within 5s,
the setting will be invalidated.
Exiting the Vacation function:
Under the Vacation mode, press the Function key to select Vacation until the
corresponding icon 4 gets flickering, and then press the OK key for confirmation. The
Vacation function will get exited.
NOTE: When the Smart ECO or Fast Cooling function is enabled, the Vacation function
will be disabled automatically.
Power cut memory. In case of power failure, the refrigerator will maintain the
operating state before power failure when power supply is restored.
Power-on delay . In order to protect the refrigerator compressor from being damaged
in the case of short-time power failure (i.e., less than 5 minutes), the compressor will
not be started immediately after it is powered on.
Over-temperature alarm (only after power outage) . When the refrigerator
system is powered on, if the freezer sensor temperature is higher than -10
℃
, digits of
the freezer zone get flickering on the display. The freezer temperature can be displayed
when any key is pressed, and the normal display will be restored when any key is
pressed again or after 10s.
Door open alarm. If the fridge door is open for more than 3 minutes, buzzer alarms
will be continuously issued, which can be stopped when any key is pressed, but will be
restored after 3 minutes if the door keeps open. The alarms will not be lifted until the
door is closed.
Fault alarm. In case E0,E1,E2,EH, or EC is displayed on the operation panel, it
indicates fault with the refrigerator. Please contact the aftersales person for visiting
service in such case.