SNAIGE RF59FB-TN00NE0, Руководство пользователя

Страница: 20 / 32

19
–
When performing activities, such as cleaning, maintenance or moving, the
appliance must be completely disconnected from power supply (by pulling the plug
out from the socket). Do not pull on the cord, but hold the body of the plug instead.
–
Do not place heavy objects on the top of the freezer
–
Do not place any switched on electrical devices on top of the appliance.
–
Do not place any dishes with liquids on top of the appliance and do not keep
flowers in vases or other liquid-filled vessels on the appliance.
–
Do not climb on or sit on the appliance, do not lean on or hang on the
appliance doors and do not allow children to do this..
–
Do not remove or touch items from the freezer compartment if your hands are
wet or damp.
–
Do not use water spray and steam to clean the appliance.
The manufacturer guarantees reliable operation of the refrigerator when
the relative air humidity not greater than 70 per cent and the ambient
temperature is:
+10 TO +32 DEGREES CELSIUS - the appliance climate class is SN;
+16 TO +32 DEGREES CELSIUS - the appliance climate class is SN;
+16 TO +38 DEGREES CELSIUS - the appliance climate class is ST.
+16 TO +43 DEGREES CELSIUS - the appliance climate class is T.
INSTALLATION AND OPERATING CONDITIONS
Positioning:
•
The appliance operates properly at the ambient temperature (see product fiche). Do
not use it in the cellar, unheated summer cottage during autumn and winter. Place
the appliance in a dry, well ventilated room.
WARNING! The appliance should not be operated in an unheated room
or porch. Place the appliance away from heat sources such as kitchen
stove/oven, radiators, or direct sunlight. The appliance must not touch any
pipes for heating, gas or water supply, or any other electrical devices.
The refrigerator adopts 220~240V/50Hz AC power.
•
Do not cover the ventilation holes at the top of the appliances – it must be a good
air circulation around the appliance, there should be a gap of at least 10 cm
between the top of the appliance body and any furniture that may be above it (see
page 2, picture 2). If this requirement is not followed, the appliance consumes more
electrical energy and its compressor may overheat.
•
The appliance must stand on a level surface and must not touch the wall. If
necessary, regulate the height of the appliance by adjusting the levelling feet: by
turning them clockwise – the front of the appliance rises, by turning them counter
clockwise – it comes down.