SNAIGE C 14SM, Инструкция по эксплуатации

Страница: 10 / 12

9
CHANGING THE OPENING DIRECTION OF THE DOORS
If you have decided to change the opening direction of the refrigerator door, we
recommend doing this with an assistant. You will need: spanners No 8 and No 10, a
screwdriver.
When changing the opening direction of the door, DO NOT lay the appliance down
horizontally!
Follow these steps:
1.
Turn off the appliance and pull the plug out of the electricity supply socket.
2.
Remove support 1 and undo screws 2 .
3.
Undo the two screws 3 that hold the pull-out shelf.
4.
Remove pull-out shelf 4 .
5.
Take off bracket 5 together with the washers that are on the axle.
6.
Unscrew the axle from bracket 5 together with its washers and screw it into the second
aperture of bracket 5 .
7.
Remove compartment door.
8.
Remove plug 7 from refrigerator door and press it in on the opposite side.
9.
Take off bottom bracket 8 together with the washers that are on the axle. Unscrew the
axle by turning it counter-clockwise. Turn bracket 6 around a full 180° and screw the
axle back in. Fix the bracket in place on the opposite side.
10.
Mount refrigerator compartment door on the axle of bracket 8 .
11.
Fix bracket 5 in place together with the washers that are on the axle.
12.
Put the pull-out shelf back in place and replace screws 2 and 3 . Place support 1 in the
groove at the top back part of the refrigerator.
13.
Remove bolt caps a and plugs b . Unscrew the bolts holding the handles in place. Move
the handles to the other side. Screw on. Press plugs into the remaining apertures in
the door and cover bolts with caps
a .
If the device has been tilted to more than 30°, wait for about 4 hours before re-
connecting it to the mains.