background image

3

Publ. nr 6053.411  0315

Instruction book

SC - TA/CA

SAFETY REGULATIONS

BEFORE OPERATION

Persons responsible, particularly
machine drivers and service staff,
must be instructed on the regulations
for normal and safe use of commercial
lift-machine which accompany this
manual. Follow the guidelines and
safety regulations applicable to:
- use of commercial machine
- roads and work places
- drivers (rights, obligations and

regulations for implementation)

- any extra equipment
- different types of vehicle
- service (maintenance and inspection)
- annual inspection for the prevention

of accidents.

The driver /(owner) or other persons in
positions of responsibility must ensure
that the above guidelines and safety
regulations are adhered to. When a
trained driver is about to operate the
truck, instruct him on:
- special functions of the SMV

machine extra equipment

- special operating applications.

Driving, manoeuvring and steering
should be practised until the driver is
fully acquainted with all these
operations.

Only after that stage can training in
stacking manoeuvres begin.
The stability of the machine in the
working area can only be guaranteed if
the correct procedures are followed.
Should the machine start to roll due to
unapproved manoeuvres or incorrect
driving, the full instructions supplied
must be followed.

Prevention of accidents

In some countries, lift-machines must
be inspected once a year by trained
staff in accordance with the prevention
of accidents regulations. Authorised
SMV  dealers can supply information
on these.

We reserve the right to modify our
design and material specifications
without prior notice.

Safety regulations

*

Follow national safety regulations.

*

The truck must only be driven by those trained to do

so and who have the permission of the management.

*

Remember: The national law on driving licences and

driving regulations always apply!

*

Before starting up: Ensure that no person(s) or other

obstacles are in the way of the truck or its equipment.

*

The truck must not be used if it has faulty brakes,

steering, lifting or other important functions.

*

Passengers are not allowed.

Lifting a person or persons is forbidden unless the

truck is equipped with an approved lift cage for this

purpose.

*

Never exceed the lifting capacity of the truck - see

type plate and load diagram.

*

The load should always be transported in a lowered

position.

*

Always report damage and wear and tear affecting the

safety/function and life of the truck.

*

The hydraulics of the truck is equipped with a high-

pressure hydraulic accumulator. Take great care when

working with the hydraulic system. Only service staff

with knowledge of the hydraulics may intervene here.

Содержание SC 4023 CA





















Отзывы: