13
Publ. nr 6053.411 0315
Instruction book
SC - TA/CA
H 090
Hydraulic system
Checking the hydraulic oil level
- Check that the oil level is between the MIN and MAX
marks on the indicator at the side of the hydraulic oil tank
(the boom should be lowered & fully retracted).
Topping up the hydraulic oil
WARNING
Do not open the oil cap whilst the engine is
running
- Unscrew the oil cap (1).
- Fill with hydraulic oil up to the upper mark on the indicator.
- Screw the cap back on.
Main circuit switch
- The circuit switch is located on the right-hand
side of the machine.
- Turn the cut-out switch clockwise to turn it on.
- Turn the switch anti-clockwise to turn it off and remove
the key.
WARNING
The main disconnect do not cut the power to
the alternator. Always disconnect the ground
(minus) cable at the battery when working
near or on the alternator.
!
BEFORE DRIVING
H 090
1
H 1056
H 1057
!
