SMT Volaro Series 4 Stand, Руководство оператора

Страница: 9 / 21

supported. If you have a VOLARO “WRIST ASSIST”, just hang the Wrist Assist from the “J” hook and do the
same. With the VOLARO Stand, the person being transferred does need some body strength . We
encourage anyone being lifted with the VOLARO Stand Lift to use their legs and arms as the lift is doing its
work. If you find that the person you are lifting is either less ambulatory than you originally thought, or the
person is just not cooperative, use the VOLARO Full Body Lift Series 4 or Series 5.
Transferring from Chair to Commode
After “ Applying sling to Person ” and “Attaching sling to Lift” segments, you are now ready to lift.
When the PA800C begins lifting and the abdomen becomes increasingly flat, snug the security strap. This
will make the transfer much more comfortable for the person being transferred.
Now that the person being transferred is clear of chair, unlock the brakes and roll them to the
commode or bathroom. Once in position, lock the brakes and attend to the person’s needs. Then lower them
down onto the seat. NOTE: Be sure to loosen the buckle as they are seated. If you wish, you may
leave the lift with the person for added support.
Transferring from Chair to Bed
After “ Applying sling to Person ” and “Attaching sling to Lift” segments, you are now ready to lift. The
VOLARO STAND can be used to transport a person back to their bed. Lift the person to a standing position.
Now transport the person to the side of the bed. Center them and make sure the back of their legs are
touching the bed. Lower the person down until they are seated. Be sure to leave slack in the loops. This will
make it much easier for you to remove the colored loops. Unbuckle their legs from the shin rest safety strap,
if applicable. Unbuckle the security strap around their abdomen and unhook them from the “J” hooks.
Remove the sling . You may push the lift away. You may have to assist the person’s feet off the foot board.
Be sure to use proper body mechanics by assisting the person to a lying position.
Transferring from Bed to Chair
When transferring from bed to wheelchair, it is required that the person be assisted to a seated
position on the edge of the bed. It is very important to use proper body mechanics. In some cases you may
wish to do this transfer with the VOLARO LIFT Series 4 OR the VOLARO LIFT Series 5 and then use the
VOLARO STAND to go back to bed. A person who has demonstrated to you their ability to stay seated on the
edge of the bed without help may not need much assistance with proper placement of the sling. For
someone with little ability, apply the sling while they are in a lying position by raising the shoulders and
inserting the sling behind the back. Attach the security strap, then bring them to a seated position on the
edge of the bed. This will shorten the time you will have to support the person in a seated position before
you hook them up.
Standing and Ambulating
The VOLARO STAND-Series 5 allows a person to be lifted to a standing position with their feet flat on
the floor. This provides an opportunity for the therapist to ambulate or perform standing exercises. Some
therapists utilize the VOLARO Seat Strap as an assist to help support the person while they are ambulating,
standing, or resting. Lifting a person with their feet on the floor: After “ Applying sling to Person ” and
“Attaching sling to Lift” segments, open the legs and remove the foot board. Place the sling behind the
person and hook them up, lock the brakes and adjust the shin rest. Make sure their feet are located on a
non-slippery surface. Adjust the shin rest. Hold onto the lift and begin to lift until the person is standing.
Make sure they are straight and not leaning back before you begin ambulation. The “H” handles or optional
ambulating bars are located directly in front and to the sides of the patient as they face the lift. The bars
work well when the person you are ambulating needs extra support. If the person becomes fatigued, just
lower them into a chair.