SMRT TENT SKY LOFT, Руководство пользователя

Страница: 10 / 16

10
•
On the back, take your two window
prop rods. You will notice two slits
on the fabric skirt. If you open the
slit, you will notice a hole for the
end of the rod.
•
At about a 40-45 degree angle,
insert the straight end of the rod –
you might have to wiggle it in, make
sure it is inserting ½ - ¾ of an inch
(13-19mm). 5/8-7/8 of in (16-22mm)
•
Hook the hook end of the rod into
the eyelet of the fabric skirt. Do
both sides. (Figure F)
•
Now that we have our tent
attached and clamped, we like to
check how secure it is. Give your
tent a firm shake with both hands
and make sure the tent is not
sliding on the rack at all.
•
Seriously, shake it hard.
•
Now that we have our tent
attached, let’s open the tent back
up. Hook your ladder to the back
of the tent and open it up. Note:
The ladder will hook onto any side
you wish.
•
Locate your shoe bags. The “S”
clips will clip onto the other
two remaining ladder mounting
locations.
Give your tent a firm shake,
shake, shake!
Setup & Open
Set up the Window Rods
E
on. Repeat that step 3 times on
all corners, giving you 4 mounting
locations. (Figure E)
•
Now you need to tighten the
nuts. The tightening sequence
for the mounting hardware is 4
rotations on inner nut, followed by
4 rotations on the outer nut, and
repeating until tightened evenly.
This ensures an equal tightening
sequence. You will know you have
tightened enough when you see
the bottom bracket start to deflect
slightly. Do not tighten one side at
a time - this will create an uneven
clamping load.
•
Repeat on the other 3 mounting
locations.
Important Warning: It is
important to note that this
tent has a Max traveling speed
of 120km/h when installed.
Please adhere to this guideline
to ensure your safety, and your
tent’s integrity.
6
8
7
5
b