SMP SPBIK, Руководство по установке

Страница: 10 / 12

POLYNESIA SPRINGERS
© SMP (PLAYGROUNDS) LTD, TEN ACRE LANE, THORPE, EGHAM, SURREY, TW20 8RJ
Appendix A Page 2
2 SEAT & PROFILE SUB-ASSEMBLY
2.1 PARTS LIST
2.2 PROFILE IDENTIFICATION
i) Position 85mm & 45mm long bolts (items 3.6 & 3.7) with plain washers (items 3.8), ensuring the counterbores
on items 3.4 and 3.3 face outermost. (FIG.10)
ii) Tighten to a torque setting between 24-27 Nm (18-20 lbf ft). Position plastic caps (item 3.9) over counterbores
and tap into place, ensuring they finish flush with the surrounding plastic surface with no sharp edges..
SEAT & PROFILE SUB-ASSY
ITEM CODE DESCRIPTION QTY.
3.1 SEE BELOW FRONT PROFILE 1
3.2 SEE BELOW REAR PROFILE 1
3.3 SEE BELOW INNER BODY PROFILE 2
3.4 SEE BELOW SPACER 2
3.5 10281000 LOCKNUT-M10 4
3.6 10251044 BOLT-M10x45LG 2
3.7 10251080 BOLT-M10x80LG 2
3.8 10291000 WASHER-PLAIN-M10 8
3.9 19028651 PLASTIC CAP 8
REFERENCE SPBIK
SPCAR
(DISCONTINUED)
SPCAT SPFIS SPHIP
PROFILE DESCRIPTION BIKE CAR CAT FISH HIPPO
FRONT PROFILE (3.1) No. 86560011 86560021 86560031 86560051 86560061
REAR PROFILE (3.2) No. 86560012 86560022 86560032 86560052 86560062
INNER BODY PROFILE (3.3) No. 86560013 86560023 86569002 86569002 86569002
SPACER (3.4) No. 86569004 86560024 86569004 86569004 86569004
FIG.10
3.5 3.8 3.9
3.2
3.3
3.8
3.6
3.4
3.9 3.8 3.7
3.9
3.8
3.5
3.1
3.9
ISSUE N