POLYNESIA SPRINGERS
© SMP (PLAYGROUNDS) LTD, TEN ACRE LANE, THORPE, EGHAM, SURREY, TW20 8RJ
Section 1 Page 4
xi)
Place locators (item 1.15) into the rectangular holes in front
profile of the profile assembly (item 1.1). (FIG.6A).
xii) Slide handles (item 1.13) onto locators (item 1.15) and
secure with M10 x 65 resistorx bolts (item 1.16) and M10
washers (item 1.6). Tighten to a torque setting of 24-27 Nm
(18-20 lbf ft). (FIG.6A).
xiii) Position handle caps (item 1.14) in end of handles and tap
into position, ensuring they finish flush with the surrounding
plastic surface with no sharp edges.
4
POST INSTALLATION INSPECTION
CHECK
CHECK
3
1
The unit is installed at the correct seat height.
2
All fixings are tightened to the correct torque and have no protruding sharp edges.
3
Paint work is not damaged.
4
The polyethylene is not damaged.
5
Concrete foundations are secure.
6
Concrete has a water shed away from legs.
7
Adequate provision of impact absorbing surfacing and no obstructions or trip points within
the equipments falling space.
8
Site is clear of all tools and rubbish.
9
Remove any warning signs.
1.6
1.13
1.14
1.16
1.15
1.1
ISSUE N
FIG.6A
Содержание SPBIK
Страница 2: ...INTENTIONALLY LEFT BLANK...
